CHAMPION
CUTTER

Polystyrene cutting devices at the extra class

CHAMPION CUTTER

Polystyrene cutting devices at the extra class

 

The classic styrofoam cutter for professional use. Cuts all Styrodur, Styrofoam and polystyrene rigid foam boards.

 

The classic styrofoam cutter for professional use. Cuts all Styrodur, Styrofoam and polystyrene rigid foam boards.

 
 
 
 

PRODUCT VERSIONS

 
Also available as special model with extended cutting depth up to 450 mm.

  • The cutting depths are either 330 mm (standard) or 450 mm (special cutting depth)
  • The Champion Cutter is available in two cutting lengths: 1,070 mm or 1,350 mm
  • Each model can optionally be upgraded with a rechargeable battery.

CUT VARIANTS

 
The champion cutter masters all cuts.

  • Straight cut, surface cut (separating cut), two-step cut
  • Miter cut, bevel cut, miter bevel cut, miter bevel cut
  • Concave cut, cuts for window reveals
  • Slanted insulation cut, rafter cut

PRODUCT VERSIONS

 
Also available as special model with extended cutting depth up to 450 mm.
  • The cutting depths are either 330 mm (standard) or 450 mm (special cutting depth)
  • The Champion Cutter is available in two cutting lengths: 1,070 mm or 1,350 mm
  • Each model can optionally be upgraded with a rechargeable battery.

CUT VARIANTS

 
The champion cutter masters all cuts.
  • Straight cut, surface cut (separating cut), two-step cut
  • Miter cut, bevel cut, miter bevel cut, miter bevel cut
  • Concave cut, cuts for window reveals
  • Slanted insulation cut, rafter cut
 

EQUIPMENT

 

With the slanted cutting device, wedges can be cut over the whole length of the non-plasticized foam slab.

 

Switch-on by pushbutton in the strap or with pedal switch. Ready for cutting in 1 to 2 seconds.

 

Thanks to adjustable wire height, depth limiters, ridersand limit stops, as many as desired slabs can be manufactured with exactly the same dimensions. Strap adjustable from 0-90°.

 

With a lightweight, stable and height-adjustable castor base.

 

Including corner and rafter cutters, which can be removed if necessary.

 
 

AREAS OF APPLICATION

 

  • wall insulation
  • flat- and pitched roof insulation
  • in between rafter insulation
  • under and rafter insulation

ADVANTAGES

 

  • Easy step cuts thanks to depth limitations.
  • Scale & limit stop rider for precise cuts. Time-intensive marking of insulating slabs can be dispensed.
  • Several scales for easy measuring.
  • All guide rails are ball bearings.

EQUIPMENT

With the slanted cutting device, wedges can be cut over the whole length of the non-plasticized foam slab.
 
Switch-on by pushbutton in the strap or with pedal switch. Ready for cutting in 1 to 2 seconds.
 
Thanks to adjustable wire height, depth limiters, ridersand limit stops, as many as desired slabs can be manufactured with exactly the same dimensions. Strap adjustable from 0-90°.
 
With a lightweight, stable and height-adjustable castor base.
 
Including corner and rafter cutters, which can be removed if necessary.
 

AREAS OF APPLICATION

 
  • wall insulation
  • flat- and pitched roof insulation
  • in between rafter insulation
  • under and rafter insulation
 

ADVANTAGES

 
  • Easy step cuts thanks to depth limitations.
  • Scale & limit stop rider for precise cuts. Time-intensive marking of insulating slabs can be dispensed.
  • Several scales for easy measuring.
  • All guide rails are ball bearings.

TECHNICAL DATA

 

cut length 1070 mm or 1350 mm
cut depth 330 mm or 450 mm
slab support surface 1.000 mm + side support with additional 750 mm
miter The strap is adjustable by 90 degrees.
ruler Millimeter graduation, adjustable with stop tab
stand with wheels, height adjustable up to 24 cm
Transformer and / or battery 42 V / 160 Watt 230 V / 50-60 Hz IP 68 – including thermo-protection and / or battery
weight 14 kg
dimensions baseplate 1.650 x 470 x 18 mm

TECHNICAL DATA

cut length 1070 mm or 1350 mm
cut depth 330 mm or 450 mm
slab support surface 1.000 mm + side support with additional 750 mm
miter The strap is adjustable by 90 degrees.
ruler Millimeter graduation, adjustable with stop tab
stand with wheels, height adjustable up to 24 cm
Transformer and / or battery 42 V / 160 Watt 230 V / 50-60 Hz IP 68 - including thermo-protection and / or battery
weight 14 kg
dimensions baseplate 1.650 x 470 x 18 mm

HOT WIRE CUTTER: ACCESSORIES AND SYSTEM PRODUCTS

Equipment

 
optional accessories, transport cases, foot switches and spare parts.
 
more about the product

Consumables

 
The hot wire foam cutter is equipped with a special corrosion- and heat-resistant conductor wire, made of a nickel-chromium-copper alloy.
 
more about the product

Complementary products

 
The Styrocutter – a hand-held foam cutter with a blade, is the perfect complement to the large hot wire foam cutters and ideal for detailed work.
 
more about the product

Similar products

 
The Alucutter Profi – our bestseller among the professional hot wire foam cutting machines.
 
more about the product

HOT WIRE CUTTER: ACCESSORIES AND SYSTEM PRODUCTS

Equipment
 
optional accessories, transport cases, foot switches and spare parts.
 
more about the product
Consumables
 
The hot wire foam cutter is equipped with a special corrosion- and heat-resistant conductor wire, made of a nickel-chromium-copper alloy.
 
more about the product
Complementary products
 
The Styrocutter – a hand-held foam cutter with a blade, is the perfect complement to the large hot wire foam cutters and ideal for detailed work.
 
more about the product
Similar products
 
The Alucutter Profi – our bestseller among the professional hot wire foam cutting machines.
 
more about the product

VIDEOS