ALUCUTTER PRO

The hot wire foam cutter for professional insulation and thermal insulation work.

ALUCUTTER PRO

 
The hot wire foam cutter for professional insulation and thermal insulation work.
 

 

The Alucutter PRO is an extremely light-weight cutter that impresses with maximum stability, a large number of cutting variants and robustness.

  • Masters all cutting variants; also rafter cuts (with the optional corner- and rafter cutter).
  • The additional corner and rafter cutter enables fast and precise cutting of rafters.
  • Available in cutting depths of 330 mm and 450 mm.

The Alucutter PRO is an extremely light-weight cutter that impresses with maximum stability, a large number of cutting variants and robustness.

  • Masters all cutting variants; also rafter cuts (with the optional corner- and rafter cutter).
  • The additional corner and rafter cutter enables fast and precise cutting of rafters.
  • Available in cutting depths of 330 mm and 450 mm.
 
 
 
 

PRODUCT VERSIONS

  • The insulation cutter Alucutter Premium is available in cutting depths of 330 mm and 450 mm.
  • Optionally available with a corner and rafter cutter.

CUT VARIANTS

With the professional hot wire insulation material cutter Alucutter Premium these cut variants can be carried out:

  • Straight cut, surface cut (separating cut), step cut
  • Miter cut, bevel cut, miter bevel cut, miter bevel cut
  • Concave cut, cuts for window reveals
  • Slope insulation cuts (wedges) and rafter cutouts
  • Rafter cutouts with the optional corner and rafter cutter

PRODUCT VERSIONS

  • The insulation cutter Alucutter Premium is available in cutting depths of 330 mm and 450 mm.
  • Optionally available with a corner and rafter cutter.

CUT VARIANTS

With the professional hot wire insulation material cutter Alucutter Premium these cut variants can be carried out:

  • Straight cut, surface cut (separating cut), step cut
  • Miter cut, bevel cut, miter bevel cut, miter bevel cut
  • Concave cut, cuts for window reveals
  • Slope insulation cuts (wedges) and rafter cutouts
  • Rafter cutouts with the optional corner and rafter cutter
 

EQUIPMENT

 
Corner and rafter cutter
 
The corner and rafter cutter is ideal for use in roof insulation with rigid foam panels.
 
Hot wire foam cutter for slanted cuts
 
With the Alucutter Premium, wedges can be cut along the length of the entire rigid foam slab.
 
Sturdy despite minimum weight
 
The extendable stand (height- and width adjustment) makes the hot wire foam cutter extremely stable.
 
Including scaffolding bracket
 
The Styrofoam cutter is easy to carry, very slim and therefore ideal for work on scaffolding.
 
Side supports
 
Wide and stable side support.
 
 

AREAS OF APPLICATION

 

  • wall insulation
  • flat- and pitched roof insulation
  • in between rafter insulation

ADVANTAGES

  • Thanks to its aluminum construction, the Styrofoam cutter is light and corrosion resistant.
  • Equipped with various scales and stop tabs for precise cuts. This eliminates the time-consuming marking of the insulation boards.
  • Thanks to the lockable wire height, depth limiters, riders and stops, any number of plates can be produced with exactly the same dimensions.
  • All guide rails are ball-bearing, for a smooth cut through hard foam.

EQUIPMENT

 
Corner and rafter cutter
 
The corner and rafter cutter is ideal for use in roof insulation with rigid foam panels.
 
Hot wire foam cutter for slanted cuts
 
With the Alucutter Premium, wedges can be cut along the length of the entire rigid foam slab.
 
Sturdy despite minimum weight
 
The extendable stand (height- and width adjustment) makes the hot wire foam cutter extremely stable.
 
Including scaffolding bracket
 
The Styrofoam cutter is easy to carry, very slim and therefore ideal for work on scaffolding.
 
Side supports
 
Wide and stable side support.
 

AREAS OF APPLICATION

 
  • wall insulation
  • flat- and pitched roof insulation
  • in between rafter insulation

ADVANTAGES

  • Thanks to its aluminum construction, the Styrofoam cutter is light and corrosion resistant.
  • Equipped with various scales and stop tabs for precise cuts. This eliminates the time-consuming marking of the insulation boards.
  • Thanks to the lockable wire height, depth limiters, riders and stops, any number of plates can be produced with exactly the same dimensions.
  • All guide rails are ball-bearing, for a smooth cut through hard foam.

TECHNICAL DATA

cut length 1350 mm
cut depth 330 mm
slab support both sides 1.000 mm
miter adjustment range (cutting bow) 0-90 degrees
ruler Millimeter graduation, adjustable with stop tab
corner & rafter cutter available as optional accessory
stand integrated, height and width adjustable
transformer or rechargeable battery 220 – 230 V / 50-60 Hz / 37 V, 160 VA / Schutzklasse IP 68. Absolutely waterproof. Upgradeable to the battery operation.
plug Verbindung zum Trafo über spritzwassergeschützen XLR-Industriestecker
frame Welded and powder-coated aluminum
bow Powder-coated aluminum with ball-bearing guide
weight 14 kg
dimensions 95 mm x 370 mm x 1.720 mm

TECHNICAL DATA

HARTSCHAUMSCHNEIDER ALUCUTTER PROFI

cut length 1350 mm
cut depth 330 mm
slab support both sides 1.000 mm
miter adjustment range (cutting bow) 0-90 degrees
ruler Millimeter graduation, adjustable with stop tab
corner & rafter cutter available as optional accessory
stand integrated, height and width adjustable
transformer or rechargeable battery 220 – 230 V / 50-60 Hz / 37 V, 160 VA / Schutzklasse IP 68. Absolutely waterproof. Upgradeable to the battery operation.
plug Verbindung zum Trafo über spritzwassergeschützen XLR-Industriestecker
frame Welded and powder-coated aluminum
bow Powder-coated aluminum with ball-bearing guide
weight 14 kg
dimensions 95 mm x 370 mm x 1.720 mm

HOT WIRE CUTTER: ACCESSORIES AND SYSTEM PRODUCTS

Accessories

 
optional accessories, transport cases, foot switches and spare parts.
 
more about the product

Consumables

 
the hot wire foam cutter is equipped with a special corrosion- and heat-resistant conductor wire, made of a nickel-chromium-copper alloy.
 
more about the product

Complementary products

 
The Styrocutter – a hand-held foam cutter with a blade, is the perfect complement to the large hot wire foam cutters and ideal for detailed work.
 
more about the product

Similar products

 
The Alucutter Profi – our bestseller among the professional hot wire foam cutting machines.
 
more about the product

HOT WIRE CUTTER: ACCESSORIES AND SYSTEM PRODUCTS

Accessories
 
optional accessories, transport cases, foot switches and spare parts.
 
more about the product
Consumables
 
the hot wire foam cutter is equipped with a special corrosion- and heat-resistant conductor wire, made of a nickel-chromium-copper alloy.
 
more about the product
Complementary products
 
The Styrocutter - a hand-held foam cutter with a blade, is the perfect complement to the large hot wire foam cutters and ideal for detailed work.
 
more about the product
Similar products
 
The Alucutter Profi - our bestseller among the professional hot wire foam cutting machines.
 
more about the product

VIDEOS